
The frame metal detector is a widely used metal detection device for belt conveyor lines. It adopts digital phase-shift technology to identify ferrous and non-ferrous metal impurities in bulk materials, triggering alarms or linkage actions to protect downstream crushing equipment.
GJT-B series metal detector applies advanced digital phase-shifting detection technology. When metal impurities pass through the sensor frame, they disturb the built-in electromagnetic field. The system captures the signal and sends instructions to the actuator, realizing sound and light alarm or linkage with the iron remover to remove harmful metals.
Industries of Application

It can detect iron, aluminum, stainless steel and alloy metals. The sensitivity can be quantitatively adjusted. It has a timing delay function from 1 to 10 seconds, with relay output of one normally open and one normally closed contact, which is convenient to connect with the on-site control system.
This metal detector is suitable for thermal power, cement, papermaking, mining, forestry, environmental protection, building materials, food and grain industries. Multiple models cover belt width 500mm to 2000mm, matching different conveyor specifications.
Key Points for Installation and Use
The vibration amplitude of the conveyor frame shall be less than 0.5mm. In high vibration sites, the sensor bracket needs independent installation.
01
Keep stable power supply. A voltage stabilizer is recommended under unstable voltage conditions.
02
It is often used together with electromagnetic or permanent magnetic iron separators to build a double metal removal protection system.
03
Regular inspection of sensors and circuits helps reduce false alarms caused by electromagnetic interference.
04
For proper selection, confirm your belt width, belt speed and material properties first. Contact us if you need technical drawing or quotation.




